Hitachi IC35L060AVV207 Datasheet Page 80

  • Download
  • Add to my manuals
  • Print
  • Page
    / 247
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 79
8.1 Alternate Status Register
ERRIDXCORDBQ
DSC/
SERV
DFRDYBSY
01234567
Alternate Status Register
Figure 69. Alternate Status Register
This register contains the same information as the Status Register. The only difference is that reading this
register does not imply interrupt acknowledge or clear a pending interrupt. See 8.13, “Status Register” on
page 70 for the definition of the bits in this register.
8.2 Command Register
This register contains the command code being sent to the device. Command execution begins immedi-
ately after this register is written. The command set is shown in Figure 88 on page 106.
All other registers required for the command must be set up before writing the Command Register.
8.3 Cylinder High Register
This register contains the high order bits of the starting cylinder address for any disk access. At the end of
the command this register is updated to reflect the current cylinder number.
In LBA Mode this register contains Bits 16-23. At the end of the command this register is updated to
reflect the current LBA Bits 16-23.
The cylinder number may range from zero to the number of cylinders minus one.
When 48-bit addressing commands are used, the "most recently written" content contains LBA Bits 16-23
and the "previous content" contains Bits 40-47. The 48-bit Address feature set is described in
Section 9.16, "48-Bit Address Feature Set" on page 93.
8.4 Cylinder Low Register
This register contains the low order bits of the starting cylinder address for any disk access. At the end of
the command this register is updated to reflect the current cylinder number.
In LBA Mode this register contains Bits 8-15. At the end of the command this register is updated to reflect
the current LBA Bits 8-15.
The cylinder number may be from zero to the number of cylinders minus one.
When 48-bit addressing commands are used, the "most recently written" content contains LBA Bits 8-15
and the "previous content" contains Bits 32-39.
Deskstar 180GXP hard disk drive specifications
66
Page view 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 246 247

Comments to this Manuals

No comments