Hitachi P50A402 User Manual download pdf (Page 8)

How To Install Your New Hitachi Plasma Television

WALL MOUNTING SETUP

STEP (1) : REMOVE THE STAND BASE FROM THE PLASMA TELEVISION

Please remove the 4 screws shown below in order to separate the TV from the Table Top Stand. Now the Table Top Stand can be separated

from the TV. Useful dimensions for the WALL MOUNT assembly are in page 47 for 50” models and in page 48 for 42” models.

Although this Plasma Display Panel can be installed using a variety of third party wall mounting brackets/

devices, such third party brackets/devices have not been tested or approved by Hitachi for use or compatibility

with this Plasma Display Panel. Accordingly, Hitachi accepts no responsability or liability for any injuries or

property damage resulting from the use of such third party brackets/devices. Hitachi strongly advices that any installation of this Plasma

Display Panel using wall mounting brackets/devices be performed only by a qualied and experienced television installation technician

who has completed a thorough evaluation of:

a) the weight-bearing strength and stability of the intended wall mount surface; and

b) the weight-bearing strength and compatibility of the intended wall mount brackets/device.

CAUTION

4 SCREWS

TV STAND BASE

Screw Mounting Holes (4 places). Don't

use the original screws (A) that comes in

the TV for the Wall Mount Bracket. The

length is not long enough.

Wall Mount Brackets

Screw Length (A)

Insertion length (B)

Spring Washer (C)

Plane Washer (D)

Wall Mount Bracket (E)

Example :

A = B+C+D+E

A: 13~15 mm.

B: 9~11 mm.

C: 1 mm.

D: 1 mm.

E: 2 mm.

The screw type :Theread ISO M6 (Metric type,

do not use Standard type).

For Wall Mount assembly; please refer to the Installation Manual of the

Wall Mount Unit.

Insertion length (B) of the screws must be within 9~11 mm. If the length is less than 9 mm, the

weight can not be maintained. If the length is more than 11 mm, a space is created between

the Wall Mount Bracket and the Plasma Television. This length is very important.

STEP (2) : INSTALL THE WALL MOUNT BRACKETS ON THE PLASMA TELEVISION USING 4 SCREWS.

CAUTION

STEP (3) : TIPS TO CONSIDER FOR THE LOCATION OF THE PLASMA TELEVISION.

More than

30 cm (1').

More than

10 cm (4").

Keep

more than

2 cm (0.8")

away from

the wall.

Do not block the ventilation holes. In •

addition please keep a certain distance around

and make sure not to obstruct ventilation.

Blocking the ventilation holes might cause re or

defect.

If you purchased the Wall Mount unit, please ask for a professional •

installer. Do not install by yourself.

This plasma unit features an advanced ventilation system configured •

for vertical installation. A knowledgeable and experienced professional

technician can perform other mounting or installation orientations (e.g.,

horizontal, tilted) provided that you specically inform the technician of

the unit's specialized ventilation needs. Call 800-HITACHI for additional

info and guidance.

CAUTION

4 SCREWS

TV STAND BASE

50” models 42” models

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 61 62

Comments to this Manuals

No comments

Hitachi P50A402 User Manual Page 8

Comments to this Manuals

Related products and manuals for Televisions Hitachi P50A402