Hitachi L40A105A User Manual download pdf (Page 17)

ENGLISH

Checking the digital signal

strength

This TV will allow you to view the digital signal meter for

digital channels.

Select “Channel”, then press ▶ or ENTER.

Press ▲ or ▼ to select “Signal Meter”.

Press ▶ or ENTER to check the digital signal strength.

The digital signal strength screen will appear.

If necessary, adjust the direction of the antenna to obtain the

maximum signal strength.

Signal Meter

Signal Level

0 50 100

NOTE:

Signal meter feature is not available for analog channels.

After 240 seconds, the Signal Meter screen will clear and the TV

will return to normal viewing automatically.

•

Labeling channels

Channel label appears with the channel number display each

time you turn on the TV, select a channel, or press DISPLAY.

You can choose any four characters to identify a channel.

To create channel labels

Select “Channel”, then press ▶ or ENTER.

Press ▲ or ▼ to select “Channel Labels”, then press ▶ or

ENTER.

The Channel Labels menu will appear.

Press ◀ or ▶ to select a channel you want to label, then press ▼.

Channel Label

Label Clear >>

Channel Labels

Channel Number 15-1

CH-1

:Adjust

:Move

Press ◀ or ▶ repeatedly until the character you want appears

in the first space.

Label Clear >>

Channel Labels

Channel Number 15-1

Channel Label

CH-1

:Adjust

:Move

ENTER :Select

The characters rotation as follows:

SPACE

, () @ / + =

If the character which you desire appears, press ENTER.

Repeat this step to enter the rest of the characters.

If you would like a blank space in the label name, you must

choose the empty space from the list of characters.

Repeat steps 3-4 for other channel. You can assign a label to

each channel.

When you finish inputting the label name, press EXIT to return

to the normal screen.

To clear a Channel Label

After step 3 above, press ▲ or ▼ to select “Label Clear”, then

press ▶ or ENTER.

NOTE:

The channel labels will be reset after “Scan” on page 16.

Labeling video inputs

The Video Label feature allows you to label each input

source for your TV.

Select “Setup”, then press ▶ or ENTER.

Press ▲ or ▼ to select “Video Label”, then press ▶ or ENTER.

Press ▲ or ▼ to select an input which you want to label.

Press ◀ or ▶ to select the desired label for that input source.

Component -

HDMI1 -

HDMI2 -

HDMI3 -

PC -

Video Label

Video1 -

Video2 -

:Adjust

:Move

Available video labels: – / VCR / DVD / STB / Cable / Satellite /

Receiver / Game / Camcorder / PC / DVI PC / Blu-ray

Setting the Parental Control

An age limitation can be set to restrict children from viewing

or hearing violent scenes or pictures that you may choose

to exclude. You may set this restriction separately. To use the

Parental Control function, you must register a password.

To register a password

Select “Locks”, then press ▶ or ENTER.

Select and enter your password (4 digits) using Number

buttons (0-9), then press ENTER.

Locks

New Password

* * *

:Enter Code

[0-9]

ENTER :Select

“ ” appears instead of the number.

Enter the same password again to confirm, then press

ENTER.

The password is now registered.

NOTE:

If you forget the password, contact Customer Service at

1-800-289-0981 (USA/CANADA) for assistance.

Your original remote control will be required.

To avoid forgetting the password, write it down and keep in a

safe place.

•

3IM0821B_En.indd 173IM0821B_En.indd 17 11/29/11 10:06:04 AM11/29/11 10:06:04 AM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 28 29

Comments to this Manuals

No comments

Hitachi L40A105A User Manual Page 17

Comments to this Manuals

Related products and manuals for LCD TVs Hitachi L40A105A