Hitachi LE32H405 User Manual download pdf (Page 13)

Starting setup

The Setup Wizard appears the first time you turn on the TV. It

will assist you to specify the Air/Cable setting and program

your channels automatically.

IMPORTANT: Make sure that the antenna or cable TV system

connection is made.

To turn on the TV, press POWER (POWER indicator on the

front of the unit changes blue. It may take approx. 10 seconds

for a picture to appear on screen.). The Setup Wizard function

begins.

Press • or • to select "Source", then press • or • to select

"Cable" or "Air".

Press • or • to select "Scan", then press • or SELECT.

"Setup Wizard " will begin. After the Setup Wizard is

completed, the TV channel appears on the screen.

• Depending on the reception condition, it may take up to 25

minutes or more to complete memorizing digital cable

channels. Please allow the process to complete without

interruption.

• If you press EXIT in the process of "Setup Wizard", the Setup

Wizard stops and changes to the normal screen. When you

make a menu selection, your changes occur immediately. You

do not have to press EXIT to see your changes.

TV operation

To turn on the TV, press POWER.

(POWER indicator on the front of the unit changes blue.

It may take approx. 10 seconds for a picture to appear on

screen.)

Adjust the volume level by pressing VOL ^ or v. The

volume level will be indicated on the screen by volume bars.

As the volume level increases, so do the number of bars.

If the volume decreases, the number of volume bars also

decreases.

Set the Source option to the appropriate position.

Press the Direct Channel Selection (0-9, -) buttons to

select the channel.

(If you press only the channel number, channel selection will

be delayed for a few seconds.)

TO SELECT ANALOG CHANNELS

1-9: Press 1-9 as needed. Example, to select channel

2, press 2, then press SELECT.

10-99: Press the 2 digits in order. Example, to select

channel 12, press 1, 2, then press SELECT.

100-135: Press the 3 digits in order. Example, to select

channel 120, press 1, 2, 0, then press SELECT.

TO SELECT DIGITAL CHANNELS

Press the first 1-3 digits, then press the - button followed by

the remaining number.

Example, to select channel 15-1, press 1, 5, -, 1, then press

SELECT.

• If a channel is selected with only audio content, "Audio

only" will be displayed on the screen.

• If a channel is selected with a weak digital signal, "Weak

Signal or Channel not available." will be displayed on the

screen.

• The same program may be available on either an analog

channel or a digital channel. You may choose to watch

either format.

• If a channel is selected to which you have not subscribed,

"Scrambled Video" will be displayed on the screen.

VHF/UHF/CABLE CHANNELS

Air Cable

VHF VHF

2-13 2-13

UHF CATV 1-125

14-69 Digital Terrestrial Broadcast(8VSB):2-69

Digital cable(64/256 QAM): 1-135

• If a channel with no broadcast is selected, the sound will

automatically be muted.

• It may take a few seconds for a digital channel picture to

appear on screen after being selected.

To select the video input source

To view a signal from another device connected to your LCD TV,

such as a VCR player, press INPUT, then press • or •, then

press SELECT. You can select TV, Video, Component, HDMI or

RGB depending on which input jacks you used to connect your

devices.

CH ^Iv

Press and release CH ^Iv. The channel automatically stops at

the next channel set into memory.

For proper operation, before selecting channels, they should be

set into the memory. Refer to the Channels Menu on page 14.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments

Hitachi LE32H405 User Manual Page 13

Comments to this Manuals

Related products and manuals for LCD TVs Hitachi LE32H405