Hitachi UT32V502W User Manual download pdf (Page 25)

ENGLISH

BASIC OPERATION (continued)

Input Switching to HDMI and RGB

By pressing the Input Select button , you can switch the

input to display the image outputting from the external equipment

connected to each terminal (HDMI and RGB (/Composite)).

Press the button on the remote control.

Each time this button is pressed, the screen displays the

corresponding mode in the following sequence.

HDMI RGB (/Composite)

Press the or button to directly select the input mode.

The Input modes can also be switched using the Input Select

button on the control panel.

Each time this button is pressed, the screen displays the

corresponding mode in the following sequence.

HDMI RGB (/Composite)

Input Signal Screen Display

The input signal status can be displayed on the screen by pressing the button on the remote control.

The display will go out in approximately 6 seconds.

HDMI

DVI

720p

Input mode

Signal mode

HDMI-DVI

connection only

HDMI mode

Composite

mode

RGB

H : 48.4kHz

V : 60.0 Hz

Input mode

Input horizontal

frequency

Input vertical

frequency

RGB mode

INFO

button

Input Select

NOTE

Switching between RGB and Composite Mode

When pressing button, you will see the image from either RGB or Composite mode. You can set up the

mode in advance if necessary.

1. Press MENU button in RGB or Composite mode.

2. Select “Setup” menu.

3. Select “RGB input”.

Select “Composite” to display the image from a video source via the optional D-sub 15 pin - composite

cable.

Select “RGB” to display the image from PC.

See

and

for details of “RGB input” menu.

RGB Input

Select button

HDMI Input

Select button

Input Select

button

Menu button

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 52 53

Comments to this Manuals

No comments

Hitachi UT32V502W User Manual Page 25

Comments to this Manuals

Related products and manuals for Televisions Hitachi UT32V502W