Hitachi UT32V502W User Manual download pdf (Page 22)

CONNECTION (continued)

Attach Cushion, Secure with Clamps and Fit Terminal Cover (continued)

4. Connect the Power Plug into the Wall Socket

Connect the power cord after completing all other connections.

(For some countries the type of plug is different that depicted.)

Secure the HDMI cable and power cord with clamps.

Fit the terminal cover onto the monitor.

Insert the tabs into the slots as shown and fold downward

to t the terminal cover.

CAUTION

Use only the power cord provided.

Do not use a power supply voltage other than that indicated (AC120, 60Hz). It may cause re or electric shock.

For the LCD monitor, a three-core power cord with a ground terminal is used for efciency protection. Always be sure

to connect the

power cord

to a three-pin grounded outlet and make sure that the cord is properly grounded. If you use

a power source converter plug, use an outlet with a ground terminal and screw down the ground line.

Ensure that both ends of the power cord are easily accessible.

If you have to change the power cord, please use a certied power cord that meets your region’s safety standards.

Tabs

Terminal Cover

Clamp

How to remove the cover.

Using your ngers, pull backwards to

lift the cover.

Wall

Socket

Monitor

Rear

Panel

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 52 53

No comments

Hitachi UT32V502W User Manual Page 22