Hitachi USBWL11N Datasheet download pdf (Page 21)

Click the [Apply] button to save the settings.

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking [Network Restart] on the main menu (

&41).

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

• The WEP Key, WPA passphrase and SSID settings will not be set if the invalid

characters are used.

• The projector does not allow both wireless and wired LAN to be connected to

the same network. Do not set the same network address for both wireless and

wired LAN.

3. Web Control

3.1 Projector Web Control - Network Settings (continued)

Item Description

Wired Setup Congures the wired LAN settings.

IP Conguration Congures network settings.

DHCP ON Enables DHCP.

DHCP OFF Disables DHCP.

IP Address Congures the IP address when DHCP is disabled.

Subnet Mask Congures the subnet mask when DHCP is disabled.

Default

Gateway

Congures the default gateway when DHCP is disabled.

DNS Server Address Congures the DNS server address.

Other Setup Congures other network settings.

Crestron e-Control

Set whether to or not to use Crestron e-Control

If you choose Disable, the Logon window of the Projector

Web Control and not the selection window will be displayed

at rst of the Web Control.

NOTE

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 69 70

No comments

Hitachi USBWL11N Datasheet Page 21