Hitachi USBWL11N Datasheet download pdf (Page 31)

Item Description

Time difference

Congures the time difference. Set the same time difference

as the one set on your computer. If unsure, consult your IT

manager.

SNTP

Click the [ON] check box to retrieve Date and Time

information from the SNTP server and set the following items.

SNTP Server Address

Congures the SNTP server address in IP format.

• The address allows not only IP address but also domain

name if the valid DNS server is setup in the Network

Settings. The maximum length of host or domain name is up

to 255 characters.

Cycle

Congures the interval at which to retrieve Date and Time

information from the SNTP server (hour:minute).

Click the [Apply] button to save the settings.

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking the [Network Restart] on the main menu (

&41).

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

• Once you turn off the projector in the SAVING mode (&SETUP menu in the

Operating Guide) or the AC power, the current date and time setting is reset.

• To enable the SNTP function, the time difference must be set.

• The projector will retrieve Date and Time information from the time server and

override time settings when SNTP is enabled.

• The internal clock’s time may not remain accurate. Using SNTP is

recommended to maintain accurate time.

NOTE

3.1 Projector Web Control - Date/Time Settings (continued)

3. Web Control

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 69 70

No comments

Hitachi USBWL11N Datasheet Page 31