Hitachi CP-S860W User Manual download pdf (Page 12)

Installation

Typical LCD Projector and Screen Installation

Using the adjusters

a. Distance from the LCD projector to the screen

b.Distance from the lens center to the bottom of

the screen (a,b : +/-10%).

The projection distances shown in the diagram to

the left are for full size (800 x 600 dots).

The LCD projector should normally be used

level (the legs can point upward).

Positioning the projector sideways, or with the

lens pointing upward or downward can cause the

internal temperature to rise, which could result in

a malfunction.

Caution

Use the diagram below as reference to determine the screen size and projection distnace.

• Do not release the locks unless the projector is being held; otherwise, the projector could

overturn or the fingers could get caught and cause personal injury.

• Do not force the adjusters to rotate. This could damage the adjusters or cause the lock to fail.

• Lock the adjusters firmly. If the lock is difficult to operate, change the angle slightly and try again.

Use the adjusters on the bottom to adjust the projection angle.

1. Lift up the projector and release the adjuster lock.

2. After adjusting the projection angle, firmly lock the adjusters.

3. Rotate the adjusters for fine adjustment.

Caution

Screen

Top view

Side view

Lens center

Front view

Adjuster

Side view

Variable within the range of approximately 0° - 9°

Screen size (inches)

Minimum

Maximum

b (inches)

40 55 73 1

60 85 114 2

80 114 151 2

100 144 191 3

120 176 231 3

150 220 282 4

200 291 386 6

a (inches)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Comments to this Manuals

No comments

Hitachi CP-S860W User Manual Page 12

Comments to this Manuals

Related products and manuals for Data projectors Hitachi CP-S860W