Hitachi 55HDT79 User Manual download pdf (Page 5)

(a) Power Swivel

NOT USED

(b) Power Swivel

USED

4 in. 12 in.

10 cm 30 cm

4 in. 16 in.

10 cm 39 cm

42"

55"

Securing to a table-top

1. Using wood screws (two) fasten the set to the

clamping screw holes on the rear of the Plasma

TV stand as shown below.

2. Using commercially available wood screws, secure

the set firmly in position.

Securing to a Wall

1. Keep the Plasma television 4 inches away from the

wall except when mounted using the wall mount

bracket.

2. Secure the television to the wall as shown.

NOTES: 1. Do not block the ventilation holes of the

Plasma Television. Blocking the ventilation

holes might cause fire or defect.

2. In case of an abnormal symptom, unplug

the AC cord.

3. If you purchased the wall mount bracket

option, please ask for professional installer.

Do not install by yourself.

4. Install the unit at a proper area where it does

not expose anyone to any danger of hitting

themselves (for example their hands, head

or face, etc.) against the edge of the unit and

cause personal injury.

Caution when moving the main unit

As this product is heavy, whenever it is moved, two

people are required to transport it safely. Whenever the

unit is moved it should be lifted forward using the top

and base on both sides of the Television for stability.

When moving the Television, lift the handles (42”

models), support the top frame (55” models) and the

bottom frame as shown below.

ANTENNA

Unless your Plasma Television is connected to a cable

TV system or to a centralized antenna system, a good

outdoor color TV antenna is recommended for best

performance. However, if you are located in an

exceptionally good signal area that is free from

interference and multiple image ghosts,

an indoor antenna may be sufficient.

LOCATION

Select an area where sunlight or bright indoor

illumination will not fall directly on the picture screen.

Also, be sure that the location selected allows a free

flow of air to and from the perforated back cover of the

set. In order to prevent an internal temperature

increase, maintain a space of 10 cm (4 inches) from the

sides/back of the Television, and 30 cm (12 inches)

from the top of the television to the wall. To avoid

cabinet warping, cabinet color changes, and increased

chance of set failure, do not place the TV where

temperatures can become excessively hot, for

example, in direct sunlight or near a heating appliance,

etc.

NOTE: The Table Top Stand for model 55HDT79 &

55HDX99 is not included (Optional).

To take measures to prevent the Plasma Television from tipping over and prevent possible injury

it is important to mount the unit in a stable and flat surface.

First time use

How To Set Up Your New Hitachi Plasma Television

* Please adjust the wire length to avoid

touching the wall when turning the TV.

Wood screw

two places

Wire

42” 55”

30 cm (12 inches)

10 cm (4 inches)

CONNECT POWER SWIVEL CABLE

Connect one end of cable (Arrow mark facing left) to

the swivel slot of the Plasma Rear Panel. Connect the

other end (Arrow mark facing front)to the swivel slot of

the Table Top Stand.

TURNING RADIUS

The maximum turning radius is 30˚ (left and right). Do

not place any objects on the path of the monitor when

using the power swivel feature.

10.59 in. 13.93 in.

27 cm 36 cm

15 in. 16.85 in.

38.1 cm 42.8 cm

42"

55"

5. If the Power Swivel feature will not be

used, the Plasma television should be

secured to the wall as shown in fig. (a).

6. If the Power Swivel feature will be used,

the Plasma television should be secured

to the wall as shown in fig. (b).

1 2 3 4 5 6 7 8 9 10 ... 103 104

Comments to this Manuals

No comments

Hitachi 55HDT79 User Manual Page 5

Comments to this Manuals

Related products and manuals for Televisions Hitachi 55HDT79