Hitachi LE42S704 User Manual download pdf (Page 7)

FIRST TIME USE

Do not block the ventilation holes of the LCD •

Television. Blocking the ventilation holes might

cause overheating and damage.

In case of an abnormal symptom, unplug the power •

cord and contact 800.HITACHI.

If you purchased a wall mount bracket, it is •

recommended that you ask for professional

installation.

Install the unit at a proper area where it does not •

expose anyone to any danger of hitting themselves

(For example: their hands, head or face, etc.)

against the edge of the unit that could cause

personal injury.

Power Cord Installation

Located on the back of the TV there is one plastic clamp to hold the

power cord. Please follow the instructions below.

Pass the power cord through the wire clamp and connect it to the 1.

TV.

Close the clamp to x the power cord to the TV.2.

All the cables connected to the TV will be held by this clamp3. .

Wire Clamp

Securing to a Wall

Use a metallic wire (two locations) to fasten the set to the 1.

clamping screw on the rear of the LCD TV as shown below.

Keep the LCD television 4 inches away from the wall, except 2.

when mounted using the wall mount bracket, and secure to

the wall as shown below:

Wire

Clamp

Screw

Wire

How To Install Your New Hitachi LCD Television

ASSEMBLY OF THE BASE

IMPORTANT:

The base of the LCD TV must be assembled prior to use.

Place the TV unit face down on a soft and at surface 1.

covered by a blanket, foam, cloth, etc. to prevent any

damage or scratches to the LCD TV.

Carefully align and insert the Base to the TV stand post.2.

Insert the screws included with the accessories to the 3.

bottom of the base and tighten the bottom to the stand.

Caution when moving the main unit

As this product is heavy, whenever it is moved, at least two people

are required to transport it safely. Whenever the unit is moved, it

should be lifted forward using the top and bottom on both sides of

the Television for stability.

When moving the Television, lift from the corners, then support

the top frame as shown below.

Please use caution when handling the left and right bottom

corners of the TV, as these areas protrude slightly from the TV’s

frame. Handle this area with care to avoid damaging the unit and

the possibility of personal injury.

Location

Select an area where sunlight or bright indoor illumination will not

fall directly on the picture screen. If so, drapes or screens can be

used to reduce the reection.

Also, be sure that the location selected allows a free ow of air to

and from the perforated back cover of the set. In order to prevent an

internal temperature increase, maintain a space of 10 cm (4 inches)

from the sides/back of the Television, and 30 cm (12 inches) from

the top of the television to the ceiling. To avoid cabinet warping,

cabinet color changes, and increased chance of set failure, do not

place the TV where temperatures can become excessively hot, for

example, in direct sunlight or near a heating appliance, etc.

10 cm

(4 inches)

30 cm (12 inches)

10 cm

(4 inches)

Take the following precautions to prevent the LCD Television from tipping over and possibly causing injury. It is important to

mount the unit on a stable and at surface.

NOTES

Wire

42”

46”

4 in.

10 cm.

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Comments to this Manuals

No comments

Hitachi LE42S704 User Manual Page 7

Comments to this Manuals

Related products and manuals for LCD TVs Hitachi LE42S704