Hitachi L42EC05AU User Manual download pdf (Page 13)

Connection

Connecting Antenna Cable

Connect the 75 ohm coaxial cable (commerically available) to the antenna input terminal.

s To obtain better picture quality, use an outdoor antenna.

s If your outdoor antenna uses 75 ohm coaxial cable with an F-type connector, connect it directly to the antenna input

terminal at the rear panel.

s If your outdoor antenna uses ﬂat cable, connect it with a 75 ohm adapter (commercially available) and then to the

antenna input terminal at the rear panel.

Connecting External Equipment

You can select the appropriate connection depending on the equipment that you are connecting and the

level of picture quality you are trying to achieve. To view external source images, press to select input

source. ( page 15)

s Please refer to the user manual of the external equipment for more information on the connection to the TV.

s Please disconnect all the power supplies to the external equipment and TV before connection.

s The illustration used here is based on model L32EC05AU. There may be a slight difference in the

illustration, if you are using model L42EC05AU.

To use HDMI terminal

(side)(rear)

HDMI Device

HDMI OUT

If the external equipment has DVI output, you can connect it to the HDMI terminal using a HDMI-DVI

cable. In case of using the HDMI-DVI cable, connect analogue audio signal to RGB audio input terminal.

DVI Device

DVI OUT

AUDIO

OUT

(side)(rear)

To use Component Video terminal

[Example]

DVD Player

COMPONENT

VIDEO OUT

AUDIO

OUT

(side)(rear)

s The HDMI cable connector should

not exceed 20mm in width (W) and

10mm in height (H).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

Hitachi L42EC05AU User Manual Page 13