1ProjectorCP-X2010/CP-X2510/CP-X3010User's Manual (detailed) Operating GuideThank you for purchasing this projector.►Before using this product,
10Setting up• Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be c
11Setting upConnecting power supply1.Put the connector of the power cord into the AC IN (AC inlet) of the projector.2.Firmly plug the power cord’s plu
1230º30ºApprox.3 m Remote controlRemote controlAbout the remote control signalThe remote control works with the projector’s remote sensor. This projec
13Remote controlChanging the frequency of remote control signalThe accessory remote control has the two choices on signal frequency Mode 1:NORMAL and
14Power on/off1.Make sure that the power cord is rmly and correctly connected to the projector and the outlet.Turning on the power2.Make sure that th
15OperatingOperating1.Adjusting the volumeUse the VOLUME +/VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adj
16VIDEODOC.CAMERAKEYSTONEASPECT SEARCHBLANKMUTEMY BUTTONPOSITION12ESCENTERMENURESETCOMPUTERMY SOURCE/AUTOMAGNIFYPAGE UPVOLUMEDOWNONOFF㧗FREEZEOpe
171.Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting a
18OperatingAdjusting the projector's elevatorWhen the place to put the projector is slightly uneven to the left or right, use the elevator feet t
19Operating1.Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen.Adjusting the
2ContentsContentsAbout this manual ...1Contents . . . . . . . . . . . . . . . . . . 2Projector features ...3Preparations ...
20Operating• The zoom level can be nely adjusted. Closely watch the screen to nd the level you want.NOTE1.Press the ON button of MAGNIFY on the remo
21Operating1.Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLAN
22Operating1.To start the MENU, press the MENU button. The MENU you last used (EASY or ADVANCED) will appear. EASY MENU has priority to appear just af
23OperatingUsing the menu function (continued)3.To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER b
24EASY MENUEASY MENUFrom the EASY MENU, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons. Then perform it a
25EASY MENUItem DescriptionECO MODEUsing the ◄/► buttons turns off/on the eco mode.See the ECO MODE item in SETUP menu (34).MIRRORUsing the ◄/► butto
26PICTURE menuPICTURE menuFrom the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and pre
27PICTURE menuItem DescriptionCOLOR TEMPUsing the ▲/▼ buttons switches the color temperature mode.To adjust CUSTOMSelecting a mode whose name includes
28PICTURE menuItem DescriptionACTIVE IRISThis item is available only for CP-X2510 or CP-X3010.Using the ▲/▼ cursor buttons changes the active iris con
29IMAGE menuIMAGE menuFrom the IMAGE menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the
3Projector features / Preparations• Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when mov
30IMAGE menuItem DescriptionH PHASEUsing the ◄/► buttons adjusts the horizontal phase to eliminate icker.Right ó Left• This item can be selected only
31INPUT menuINPUT menuFrom the INPUT menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the
32INPUT menuItem DescriptionVIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.(1) Use the ▲/▼ buttons to select the input port.
33INPUT menuItem DescriptionRESOLUTIONThe resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector.(1) In the INPU
34SETUP menuSETUP menuFrom the SETUP menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the
35SETUP menuItem DescriptionMIRRORUsing the ▲/▼ buttons switches the mode for mirror status.NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Tr
36AUDIO menuAUDIO menuFrom the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the
37SCREEN menuSCREEN menuFrom the SCREEN menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press t
38SCREEN menuItem DescriptionMyScreenThis item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST
39SCREEN menuItem DescriptionMyScreen LockUsing the ▲/▼ buttons turns on/off the MyScreen lock function.ON ó OFFWhen the ON is selected, the item MySc
4Part namesPart namesProjector(1) Lamp cover (53) The lamp unit is inside.(2) Focus ring (18)(3) Zoom ring (18)(4) Control panel (5)(5) Elevator
40SCREEN menuItem DescriptionSOURCE NAMEEach input port for this projector can have a name applied to it.(1) Use the ▲/▼ buttons on the SCREEN menu t
41SCREEN menuItem DescriptionC.C.(Closed Caption)The C.C. is the function that displays a transcript or dialog of the audio portion of a video, les o
42OPTION menuOPTION menuFrom the OPTION menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press t
43OPTION menuItem DescriptionAUTO OFFUsing the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.Long (max. 99 minute
44OPTION menuItem DescriptionMY BUTTONThis item is to assign one of the following functions to MY BUTTON 1/2 on the remote control (6).(1) Use the ▲
45OPTION menuItem DescriptionSERVICESelecting this item displays the SERVICE menu.Select an item using the ▲/▼ buttons, and press the ► button or the
46OPTION menuItem DescriptionSERVICE(continued)KEY LOCKUsing the ▲/▼ buttons turns on/off the lens lock feature. When ON is selected, the buttons on t
47SECURITY menuThis projector is equipped with security functions.From the SECURITY menu, items shown in the table below can be performed.To use SECUR
48SECURITY menuItem DescriptionMyScreen PASSWORDThe MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the
49SECURITY menuItem DescriptionPIN LOCKPIN LOCK is a function which prevents the projector from being used unless a registered Code is input.1 Turning
5Part namesControl panel(1) STANDBY/ON button (14)(2) INPUT button (15, 22)(3) MENU button (22) It consists of four cursor buttons.(4) POWER indic
50SECURITY menuItem DescriptionTRANSITION DETECTORIf this function is set to ON when the vertical angle of the projector or MIRROR setting at which th
51SECURITY menuItem DescriptionMY TEXT PASSWORDThe MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set
52SECURITY menuItem DescriptionMY TEXT DISPLAY(1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the ► button to di
53Maintenance MaintenanceA lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor
54MaintenanceLamp warningReplacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE►The projector uses a high-pressure mercury glass
55MaintenanceThe air lter unit of this projector consists of a lter cover, two kinds of lters, and a lter frame. The new double large lters syste
56MaintenanceCleaning and replacing the air lter (continued)9.Turn the projector on and reset the lter time using the FILTER TIME item in the EASY M
57MaintenanceOther careIn order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year.1.
58TroubleshootingTroubleshootingIf an abnormal operation should occur, stop using the projector immediately.Otherwise if a problem occurs with the pro
59TroubleshootingRegarding the indicator lampsWhen operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it accordi
6Part namesRemote control(1) VIDEO button (16)(2) COMPUTER button (16)(3) SEARCH button (17)(4) STANDBY/ON button (14)(5) ASPECT button (17)(6) A
60TroubleshootingRegarding the indicator lamps (continued)• When the interior portion has become overheated, for safety purposes, the projector is aut
61TroubleshootingPhenomena that may be easy to be mistaken for machine defectsAbout the phenomenon confused with a machine defect, check and cope with
62TroubleshootingPhenomena that may be easy to be mistaken for machine defects (continued)Phenomenon Cases not involving a machine defectReference pag
63Phenomenon Cases not involving a machine defectReference pagePictures appear dark.The brightness and/or contrast are adjusted to an extremely low le
64SpecicationsSpecicationsSpecicationItem SpecicationProduct name Liquid crystal projectorLiquid Crystal Panel 786,432 pixels (1024 horizontal x 7
65SpecicationsSpecications (continued)[unit: mm]31728898113
7Setting upInstall the projector according to the environment and manner the projector will be used in.ArrangementRefer to the illustrations and table
8Setting up►Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the
9Setting up Y CB/PB CR/PRCOMPONENT VIDEO OUT L R AUDIO OUTVIDEO OUT L R AUDIO OUTAUDIO OUTRGB OUTAUDIO OUTRGB OUTRS-232CRGB I
Comments to this Manuals