Hitachi VT-FX6407AS User Manual download pdf (Page 20)

SETTING THE CLOCK - 20 -

This screen appears to show that the channel is being set.

The dash " - " puts out lights one by one as shown on the VCR's display.

• The VCR will automatically store channels received in your area.

• It takes about 2 - 3 minutes.

When the auto install is complete, the channel with the lowest number appears in the VCR's display.

Notes

• If you press the POWER button inadvertently before connecting all leads, follow the steps on page 20 for

further tuning function.

• If you press the POWER button during auto install mode, the VCR automatically switches to the STOP

mode.

SETTING THE CLOCK

Note: An antenna or cable must be connected to the VCR before you begin this operation.

Tips

1 You'll need to set the clock when first hooking up your VCR, and any time the power goes out for more than 1

hour. When you first plug in the VCR or after a power outage, the clock display will read "--:--" on the TV display.

To set the clock

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 76 77

No comments

Hitachi VT-FX6407AS User Manual Page 20