Hitachi L32A403 User Manual download pdf (Page 8)

How To Install Your New Hitachi LCD Television

WALL MOUNTING SETUP

STEP (1) : REMOVE THE STAND BASE FROM THE LCD TELEVISION

In order to remove the stand from the TV, please put the TV set on a soft and at surface (blanket, foam, cloth, etc.) to prevent any

damage; then remove the 4 screws shown below in order to separate the TV from the Table Top Stand. Now the Stand can be separated

from the TV. Useful dimensions for the WALL MOUNT assembly are in page 39 and 40.

Although this LCD Display Panel can be installed using a variety of third party wall mounting brackets/devices,

such third party brackets/devices have not been tested or approved by Hitachi for use or compatibility with

this LCD Display Panel. Accordingly, Hitachi accepts no responsibility or liability for any injuries or property

damage resulting from the use of such third party brackets/devices. Hitachi strongly advises that any

installation of this LCD Display Panel using wall mounting brackets/devices be performed only by a qualied and experienced television

installation technician who has completed a thorough evaluation of:

a) the weight-bearing strength and stability of the intended wall mount surface; and

b) the weight-bearing strength and compatibility of the intended wall mount brackets/device.

STEP (3) : TIPS TO CONSIDER FOR THE LOCATION OF THE LCD TELEVISION.

Screw Mounting Holes (4 places). Don't

use the original screws (A) were in the

TV for the Table Top Stand. The original

screws are not long enough to properly

secure the TV to the wall bracket.

Wall Mount Brackets

The screw type :Thread ISO M6 (Metric

type, do not use Standard type).

For Wall Mount assembly; please refer to the Installation Manual of the

Wall Mount Unit.

Insertion length (B) of the screws must be within 8.5~10.5 mm. If the length is less than 8.5

mm, the weight can not be maintained. If the length is more than 10.5 mm, a space is created

between the Wall Mount Bracket and the LCD Television. This length is very important.

STEP (2) : INSTALL THE WALL MOUNT BRACKETS ON THE LCD TELEVISION USING 4 SCREWS.

More than

30 cm (1').

More than

10 cm (4").

Keep

more than

2 cm (0.8")

away from

the wall.

Do not block the ventilation holes. In •

addition please keep a certain distance around

and make sure not to obstruct ventilation.

Blocking the ventilation holes might cause re or

defect.

If you purchased a Wall Mount bracket, please ask for a professional •

installation. Do not install by yourself.

This LCD unit features an advanced ventilation system congured for •

vertical installation. A knowledgeable and experienced professional

technician can perform other mounting or installation orientations (e.g.,

horizontal, tilted) provided that you specically inform the technician of

the unit's specialized ventilation needs. Call 800-HITACHI for additional

info and guidance.

CAUTION

4 Screws ( (a) M4 and

(b) tapping screws) Do

not mix please.

(a)

(b)

Stand Base

Screw Length (A)

Insertion length (B)

Spring Washer (C)

Plane Washer (D)

Wall Mount Bracket (E)

Example :

A = B+C+D+E

A: 13.5~15.5 mm.

B: 8.5~10.5 mm.

C: 1 mm.

D: 1 mm.

E: 3 mm.

CAUTION

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 50 51

Comments to this Manuals

No comments

Hitachi L32A403 User Manual Page 8

Comments to this Manuals

Related products and manuals for Televisions Hitachi L32A403