Hitachi KH-182B User Manual download pdf (Page 8)

-4-

Preparation before use

●

How to charge

Names of parts and their functions (Fig. 1)

The main body and the power adaptor become slightly hot, however, this is not

unusual.

2. After the standard charging time (5 hours) has elapsed, pull out the power adaptor from

the electric outlet and the main body.

(Fig. 3)

1. Turn off the switch, and connect the power adaptor to the main body and electric outlet.

(Fig. 2)

●

Head (titanium material)

Attach cotton and apply it to the skin.

The device vibrate while it is being used.

Mode indicator lamp (orange)

Turn the power switch "On," and

"CLEANSING" will start flashing. Then, it

switches and lights up while the device

is being used.

Mode switch button

Every time the button is pressed, the

mode for use will be switched.

Power switch (" ")

Turn on the power switch, and it will turn

"On." Press it again, and it will turn "Off."

An automatic shutoff function is equipped,

so if the device is not used around 5

minutes, it will automatically turn "Off."

Body

Body socket

Level indicator lamp

LOW (green): MEDIUM (green): HIGH (red)

When the power switch is switched to

“On,” the lamp indicating “HIGH,”

“MEDIUM,” or “LOW” is turned on.

Level switch button

Every time the button is pressed, "the

strength" of the electrical potential will

change. There will be no change in

vibration strength.

Charge indicator lamp

During charge : The lamp turns on. (Red)

After charging is completed : The lamp

turns off.

Buzzer (Switching sound/warning

sound/finish sound)

Every time the switch or button is pressed,

the switching sound will beep. If the

warning sound beeps while the device is

being used, this is an indication to

recharge your batteries. When each mode

is finished, the finish sound will beep.

Batteries (built-in)

Nickel hydride battery: 2

Power adaptor

Model: KH-182B

Power plug

Instrument plug

Cord

Accessories

Rings (two)

Rings for attaching cotton.

Stand

Back plate (titanium material)

Since this is not fully initially charged, charge before first using.

Make sure to use only 100-240V and use the included power adaptor.

Do not insert and remove the power plug from an electric outlet with

wet hands. (Cause of electric shocks and short-circuits)

Do not use in places splashed with water, such as in a bath,

or in damp places. (Cause of failures or short-circuits)

Charge indicator lamp

During charge : The lamp turns on. (Red)

After charging is completed : The lamp turns off.

If the plug for the device's power adaptor is pushed in with force, or unnecessarily

tilted, the main body socket may be broken.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Hitachi KH-182B User Manual Page 8

Comments to this Manuals