Hitachi P50S602 User Manual download pdf (Page 9)

FIRST TIME USE

Side Panel Jacks & Controls

In order to receive written notication, please complete

and return your warranty card.

POWER light indicator

To turn the TV ON, press the Power switch ( ). A red

stand-by indicator lamp located on the lower left corner

of the front bezel will illuminate. The Plasma TV is now

ready for remote ON/OFF operation.

Indicating

Lamp

Power Status Operating

Off OFF When the POWER switch

is set to OFF.

Lights

Red

OFF

(Stand-by)

When the POWER switch

is set to ON.

Lights

Blue

ON TV Power is ON;

picture is shown.

Lights

Orange

OFF

(Power

Saving)

TV Power is ON with

no signal input except

antenna (no sync. signal)

Blinking

Blue

ON When TV receives the IR

signal from the RC.

REMOTE CONTROL and AMBIENT LIGHT sensor

Point your remote at this area when selecting channels,

adjusting volume, etc. This area also detects ambient

light level for automatically brightness control of the

screen.

FRONT VIEW

POWER switch

This power switch is for the complete system. It is

recommended to leave this POWER switch to ON

condition (lights red) for stand-by mode.

MENU/SELECT button

This button allows you to enter the MENU, making it

possible to set TV features to your preference without

using the remote. This button also serves as the

SELECT button when in MENU mode.

INPUT/EXIT button

Press this button to access the INPUT menu. This button

also serves as EXIT button when in MENU mode.

VOLUME level

Press these buttons to adjust the sound level. The

volume level will be displayed on the TV screen. These

buttons also serve as the cursor left ( ) and right ( )

buttons when in MENU mode.

CHANNEL selector

Press these buttons until the desired channel appears

in the top right corner of the TV screen. These buttons

also serve as the cursor down ( ) and up ( ) buttons

when in MENU mode.

INPUT-3 (SIDE) JACKS

INPUT-3 provide composite Video and S-Video jacks

for connecting equipment with this capability, such as a

DVD player, Game Console or Camcorders.

HDMI-3

Use this side HDMI input for AV Equipment such as

Set-Top-Boxes or DVD players equipped with an HDMI

output connection (see page 14 for reference).

UPGRADE CARD

This card slot is for future software upgrades. Hitachi will

notify you if a software upgrade is required for your TV.

Your HITACHI Plasma TV will appear to be turned •

OFF (lights orange) if there is no video input when

INPUT 1, 2, 3, or HDMI 1, 2, 3 is selected. Check

the Power Light to make sure the TV is turned off

or in Stand-by mode (lights red) when not in use.

Remote Control cannot turn ON/OFF the TV when

•

Power Switch is set to OFF.

If Power Light Indicator Brightness is set to OFF, •

the indicating lamp will not light when the TV turns

ON. Please refer to page 41.

Please do not put anything around R/C and Ambient •

light sensor, as its function will be affected.

NOTES

POWER

CURSOR

VOL

INPUT/ EXIT

/ SELECT

Indicating Lamp

R/C and

Ambient

Light Sensor

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Comments to this Manuals

No comments

Hitachi P50S602 User Manual Page 9

Comments to this Manuals

Related products and manuals for LCD TVs Hitachi P50S602