Hitachi L32N03A User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
1
Before calling service personnel, please check the following troubleshooting guide. If any problem still
persists, unplug the TV set and call for servicing.
Symptom Check List
No picture, no sound Check if the main power of the TV is turned on.
Check the connection of the power cord and/or other cables.
Normal picture, no sound Check the volume level.
Check if the button has been pressed or not.
Check the connection of the external equipment.
Poor color or no color, normal sound
Check the value level of Brightness” and Contrast” in
PICTURE menu.
Multiple images, normal sound Check the antenna connection and direction.
Fine tuning the TV.
Check the connection of the external equipment.
The TV station may have broadcast difficulties. Try another
channel.
Snowy picture, poor sound Check the antenna connection and direction.
The TV station may have broadcast difficulties. Try another
channel.
Intermittent interference Check if the source of interference is shield well.
Remove those kinds of electrical devices away from the TV.
Poor stereo sound The TV station may have broadcast difficulties. Try to change
to mono mode.
Remote control does not work Check if the batteries are installed correctly.
The batteries may be exhausted. Replace them with new
ones.
Remove all obstruction between the remote control and the
remote control sensor.
Ensure there is no strong light shinning on the remote
control sensor.
No Signal” appears on the screen
The TV cannot detect any signals from any input terminals.
Check if the cable is connected correctly and firmly.
Check if the power of any external equipment is turned on.
Check if the input source selection is correct.
Unsupported Signal” appears on the
screen (RGB mode only)
Check if the display resolution and frequency from your PC
is a valid mode for the TV. Refer to the recommended RGB
input signal chart
Image not centered (RGB mode only)
Adjust the H Position” and V Position” in the SETUP
menu.
Troubleshooting
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments