Hitachi CP-S830W/E User Manual download pdf (Page 12)

Press the INPUT button or the INPUT SELECT (VIDEO or

RGB) button to select the source of the signal to be projected

on the screen.

· The selected signal input is displayed at the bottom right of the screen

for 3 seconds.

Power on all connected equipment.

The method of connecting various equipment, see on the page 18~26.

Turn the MAIN POWER switch of the projector on.[ I : ON]

· The ON indicator will light up orange.

Press the STANDBY/ON button.

· The ON indicator blinks (green) and then lights (green).

· The ON indicator will blink green during warm-up and light up.

· Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after

power is turned off, since the lamp has cooled preparing for next lighting.

Adjust picture size using the projection lens ZOOM knob.

Adjust focus using the projection lens FOCUS ring.

Example on-screen display

Basic operations

Remove the lens cap.

RGB1

To project the picture

RIGHT

RESET

STANDBY/ON



TIMER



BLANK

VOL

MUTE

POSITION

VIDEO1/2

RGB1/2

INPUT

RESET

MUTE INPUT

LAMP TEMP

STANDBY/ON

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

No comments

Hitachi CP-S830W/E User Manual Page 12