Hitachi CP-S370W User Manual download pdf (Page 22)

ENGLISH-21

ENGLISH

ENGLISH-21

((

))

Indicators Message

The POWER indicator, LAMP indicator, and TEMP indicator are lit and blank as follows. Take the

appropriate measures.

Table 10. Indicators Message

POWER

indicator

LAMP

indicator

TEMP

indicator

Contents

Lights

orange

Turns off Turns off

The Standby mode has been set.

Blinks

green

Turns off Turns off

Warming up. Please wait.

Lights

green

Turns off Turns off

ON. Normal operation possible.

Blinks

orange

Turns off Turns off

Cooling. Please wait.

Blinks red - -

Cooling. Please wait.

The error is found. Take the appropriate measures when the

POWER indicator ceases blinking

Blinks

/Lights red

Lights

red

Turns off

Lamp is not lit.

The interior of the equipment may be too hot. Switch power OFF,

wait 20 minutes until the equipment cools, and check whether the

ventilation openings are blocked, whether the air filter is dirty, or

whether the ambient temperature exceeds 35 °C. And switch

power ON again. Replace the lamp if the same problem occurs.

Blinks

/Lights red

Blinks

red

Turns off

Lamp or lamp cover is not found, or hasn’t been fitted in correctly.

Switch power OFF, and wait for 45 minutes until the equipment

cools. Check fitting of the lamp and lamp cover, and switch power

ON again. Contact your dealer if the same problem occurs again.

Blinks

/Lights red

Turns off

Blinks

red

The cooling fan is not operating.

Switch power OFF, and wait for 20 minutes until the equipment

cools. Check for foreign matters in the fan, and switch power ON

again. Contact your dealer if the same problem occurs again.

Blinks

/Lights red

Turns off Lights red

The interior of the equipment is too hot.

Switch power OFF, and wait for 20 minutes until the equipment

cools. Check whether the ventilation openings are blocked,

whether the air filter is dirty, or whether the ambient temperature

exceeds 35 °C. Then switch power ON again. Contact your dealer if

the same problem occurs again.

Lights

green

Blinks

red

Blinks

red

The interior of the equipment is too cool.

Check whether the ambient temperature is below 0°C. Contact your

dealer if the same problem occurs when the ambient temperature is

0~35°C.

When the internal temperature becomes excessive power is switched OFF automatically

for safety reasons, and the indicator is extinguished. Set the power switch to [

] and wait for 20

minutes until the equipment has cooled sufficiently.

NOTE

01CP-S370W 02.1.15 9:07 AM ページ 21

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 38 39

Comments to this Manuals

No comments

Hitachi CP-S370W User Manual Page 22

Comments to this Manuals

Related products and manuals for Data projectors Hitachi CP-S370W