Hitachi CP-RX82 User Manual download pdf

Projector

CP-RX82

User's Manual (detailed)

Operating Guide – Technical

Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode

720 x 400

37.9 85.0 VESA TEXT

640 x 480 31.5 59.9 VESA VGA (60Hz)

640 x 480 37.9 72.8 VESA VGA (72Hz)

640 x 480 37.5 75.0 VESA VGA (75Hz)

640 x 480 43.3 85.0 VESA VGA (85Hz)

800 x 600 35.2 56.3 VESA SVGA (56Hz)

800 x 600 37.9 60.3 VESA SVGA (60Hz)

800 x 600 48.1 72.2 VESA SVGA (72Hz)

800 x 600 46.9 75.0 VESA SVGA (75Hz)

800 x 600 53.7 85.1 VESA SVGA (85Hz)

832 x 624 49.7 74.5 Mac 16” mode

1024 x 768 48.4 60.0 VESA XGA (60Hz)

1024 x 768 56.5 70.1 VESA XGA (70Hz)

1024 x 768 60.0 75.0 VESA XGA (75Hz)

1024 x 768 68.7 85.0 VESA XGA (85Hz)

1152 x 864 67.5 75.0 VESA

1152 x 864 (75Hz)

1280 x 768 47.7 60.0 VESA W-XGA (60Hz)

1280 x 800 49.7 60.0 VESA

1280 x 800 (60Hz)

1280 x 960 60.0 60.0 VESA

1280 x 960 (60Hz)

1280 x 1024 64.0 60.0 VESA SXGA (60Hz)

1280 x 1024 80.0 75.0 VESA SXGA (75Hz)

1280 x 1024 91.1 85.0 VESA SXGA (85Hz)

1400 x 1050 65.2 60.0 VESA SXGA+ (60Hz)

1600 x 1200 75.0 60.0 VESA UXGA (60Hz)

NOTE • Be sure to check jack type, signal level, timing and resolution

before connecting this projector to a PC.

• Some PCs may have multiple display screen modes. Use of some of these

modes will not be possible with this projector.

• Depending on the input signal, full-size display may not be possible in some

cases. Refer to the number of display pixels above.

• Although the projector can display signals with resolution up to UXGA

(1600x1200), the signal will be converted to the projector’s panel resolution

before being displayed. The best display performance will be achieved if the

resolutions of the input signal and projector panel are identical.

• Automatic adjustment may not function correctly with some input signals.

• The image may not be displayed correctly when the input sync signal is a

composite sync or a sync on G.

Example of PC signal

1 2 3 4 5 6

Summary of Contents

Page 1 - Operating Guide – Technical

1ProjectorCP-RX82User's Manual (detailed)Operating Guide – TechnicalResolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode720

Page 2 - Initial set signals

2Initial set signalsInitial set signalsThe following signals are used for the initial settings. The signal timing of some PC models may be different.

Page 3 - Connection to the ports

3ACOMPUTER IN, BMONITOR OUTD-sub 15pin mini shrink jack<Computer signal>• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive

Page 4

4CS-VIDEOMini DIN 4pin jack• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL (60Hz)Pin Signal1Color signal 0.286Vp-p (NTSC, burst), 75Ω terminat

Page 5 - AUDIO OUT

5Connection to the ports (continued)EAUDIO INØ3.5 stereo mini jack• 200 mVrms 47kΩ terminatorFAUDIO OUTØ3.5 stereo mini jack• 200 mVrms 1kΩ output imp

Page 6 - COMPONENT VIDEO OUT

6 Y CB/PB CR/PRCOMPONENT VIDEO OUTTo input component video signal to COMPUTER IN ports ex.To input component video signal to the C

Comments to this Manuals

No comments

Hitachi CP-RX82 User Manual

Browse online or download User Manual for Data projectors Hitachi CP-RX82. Hitachi CP-RX82 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Data projectors Hitachi CP-RX82