Hitachi VM-E520A User Manual download pdf (Page 34)

Advanced Techniques - 34 -

Note: The date search function is released when you press the STOP button during date search mode.

Note: If the recorded time is less than 30 seconds, the date search function may not operate normally.

Using Memory

The linear time counter memory stops a rewinding tape at approximately 0;00;00M. This feature helps in locating

a specific point in the tape to which you wish to return. An example might be that you have recorded some tape

that you have already watched, you continue recording but do not care to watch the tape you recorded earlier.

The memory feature returns you to the beginning of the most recent recording.

1. Press the DISPLAY button on the remote control so the linear time counter with memory is displayed as shown

in the figure.

2. Start recording or playback of a cassette. Press the COUNTER RESET button on the remote control at the

point to which you wish to return. The linear time counter clears to 0:00:00M.

3. Press the STOP button to stop playback, or press the start/stop recording and set the CAM/OFF/VIDEO switch

to VIDEO.

4. Press the REW button and the tape stops at approximately where you reset the linear time counter. This

feature works in F.F as well.

Using the Display Button

Pressing the DISPLAY button on the remote control allows you to switch the displays in the viewfinder. When the

camcorder is turned on, the linear time counter appears.

• Pressing the DISPLAY button once displays the linear time counter with the memory feature.

• When a recorded tape is in the camcorder during the VIDEO mode, "SEARCH" appears in the viewfinder. (Refer

to "Date Search" on page 40).

• Pressing the DISPLAY button a second time returns to the linear time counter.

Note: The linear time counter with the memory feature in the viewfinder can also be displayed on the

connected television.

Using the Wireless Remote Control

Use the wireless remote control to operate the camcorder from a distance. The PLAY, F.FWD, REW, STOP,

PAUSE (START/STOP) and ZOOM buttons on the wireless remote control operate the functions of the

corresponding buttons on the camcorder. Aim the wireless remote control at the infrared receiver of the

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

No comments

Hitachi VM-E520A User Manual Page 34